WorkStar® 2103 365nm UV-A Curing Light (Beam Distance: 0-2 in)



WorkStar® 2103 365nm UV-A Curing Light               SKU: MXN02103

   PARAMETER    
                                            PERFORMANCE
LED Radiant Flux
800 mW @ emitter
LED, Wavelength
LEDEngin LZ1-30UV00, UltraViolet (UV-A) 365 - 370 nm
Typical Max Energy
1 Joule [HI setting], 0.3 Joule [LO setting] @ 0 in
Typical Max Intensity
200 mW/cm² [HI setting], 60 mW/cm² [LO setting] @ 0 in
Beam
Wide angle beam designed for close range UV-A adhesive curing.
Beam diameter = 1 in @ 0 in, 3 in @ 1 in, 5 in @ 2 in
Glass Lens
Tempered glass with a shock absorbing rubber gasket
Heat Sink
LED and lens are mounted in a sealed aluminum heat sink assembly, which protects the LED from dirt and fluids
Power/Brightness Switch
Recessed ON/OFF push button switch also controls 2 intensity levels
Favorite Intensity Level Memory
Turns ON and OFF to your favorite intensity level, yet easy to change to the other level
Batteries Included
6 AA rechargeable NiMH battery pack. Pack is user replaceable.
Run Time
High > 2.5 hours, Low > 10 hours
Recharge Time
About 3 hours
Regulator Circuit
High efficiency constant current circuit to maximize brightness and runtime
Charge/Discharge Indicator
A bicolor LED charge/discharge level indicator flashes green and red to help you estimate the remaining runtime and recharge time
Material
High impact polycarbonate, except neck and hook, which are glass reinforced ABS
Flared Base
Stable when standing upright thanks to the wide flared base
Hand Grip
Comfortable ergonomic hand grip
Head Rotation
Neck rotates 360 degrees with indents to maintain the selected position
Head Tilt
Head tilts 180 degrees
Retractable Hook length
3 inches (7.5 cm) when extended; retracts into body
Hook Diameter
1 inch (2.5 cm)
Magnets
2 powerful, co-planar, nickel-plated, neodymium rare-earth magnets
Belt Clip
Better than holster, this belt clip lets you use the light while clipped to your belt. It quickly clips onto the light and slips off just as easily, but sticks securely while in use.
Tripod
Standard camera 1/4-20 tripod socket in base, suction cup and magnet base accessories are available separately
Overall length
10 1/4 inches (26 cm)
Body Dimensions
6 3/4 x 2 x 2 inches (17 x 5 x 5 cm), anti-roll surfaces
Head Dimensions
3 x 1.5 x 1.5 inches (7.5 x 3.8 x 3.8 cm)
AC Power Supply
100-220 VAC 50/60 Hz UL-Approved North American power supply with standard "Type A", two prong plug
Car Charger
12 VDC car adapter
Weight
1 lb (0.5 kg)
Included
WorkStar® 2003 with rechargeable NiMH batteries, 100-220 VAC power supply, 12 VDC car adapter, belt clip
Warranty
1 year against manufacturing defects
UNSPSC code
39112009 Portable Shop Light
Barcode
629203021034
Shop Online
Discontined

Expert's Endorsement

1. NDT.net WorkStar® 2003 Info - May 2014.

2. The Fabricator WorkStar® 2003 Info - May 2014.

3. American Foundry Society WorkStar® 2003 Info - May 2014.

4. General Aviation News WorkStar® 2003 Info - May 2014.

5. NDT.org WorkStar® 2003 Info - April 2014.

6. Foundry WorkStar® 2003 Info - April 2014.

7. Aviation Pros WorkStar® 2003 Info - April 2014.

8. Vehicle Service Pros WorkStar® 2003 Info - April 2014.

9. MidStream Business WorkStar® 2003 Info - April 2014.

10. Mining WorkStar® 2003 Info - April 2014.

11. Energy Global WorkStar® 2003 Info - April 2014.

12. Vertical WorkStar® 2003 Info - April 2014.