2nd Gen WorkStar® 5000 LUMENATOR® - The Brightest Professional LED Work Light
The brilliant Maxxeon 2nd Gen LUMENATOR® WorkStar® 5000 Professional Rechargeable LED Work Light generates 2100 lumens and runs for over 2 hours.
The nylon handle can function as a stand on flat surfaces or as a mounting point for the optional telescopic tripod and magnetic base.
The nylon handle on the Maxxeon WorkStar® 5000 rotates 180 degrees. It is the mounting point for the optional telescopic tripods and the magnetic base.
The Maxxeon 2nd Gen LUMENATOR's® Li-ion battery pack is mounted in a sturdy case that is IP-65 dustproof and water resistent to water jets and rain. The sealed power switch is also the brightness control.
The red power switch is also the brightness control: Low-Medium-High-Off. Below the switch is the jack for the battery charger. The 3 green lights to the left of the red switch show both the battery life and the charging status, as detailed in the above illustration. These features are new to the 2nd Gen WorkStar® 5000
Not only is the LUMENATOR's® beam bright, but it is also very
wide like a floodlight. It can light up a room for construction or
emergencies or it can light up an engine bay or a piece of equipment.
The adjustable single head telescopic tripod accessory for the LUMENATOR® attaches to the nylon handle, which allows the light to tilt 180 degrees. Order MXN10082.
Included with the single head telescopic tripod is a right-angle bracket that allows the LUMENATOR® to be aimed sideways. Since the bracket can rotate 360 degrees on the tripod and the handle can tilt 180 degrees, you can aim the light as needed. Order MXN10082.
The triple head telescopic tripod accessory can hold 1, 2 or 3 LUMENATORs®.
What would you do with 6300 lumens? Order MXN10116.
Each LUMENATOR® on the triple head tripod can be aimed independently. Order MXN10116.
This powerful Neodymium magnetic base accessory for the LUMENATOR® attaches to the nylon handle. It will securely fasten the WorkStar® 5000 to any ferrous metal surface. Order MXN10085.
The removable rafter plate easily hammers into a rafter or stud providing a ferrous metal surface for the magnetic base. Use it for HVAC installations in attics or when renovating. There are 5 plates per package. Order MXN10139.
2nd Gen WorkStar® 5000 LUMENATOR® SKU: MXN05000
A: Yes, but only in the Low setting
1. Man Cave True Reviews - WorkStar® 5000 LUMENATOR™ Review - April 2017
2. Vehicle Service Pros - WorkStar® 5000 LUMENATOR® Info - October 2015
3. Pro Tool Reviews - WorkStar® 5000 LUMENATOR® Review (4.1 out of 5) - March 2016